Publications - Book
  Title Cited By Year

VoIP over IP with fingerprint authentication and digital signature

Mohd Nazri Bin Ismail, Mohd Afizi Shukran, Megat Farez Zuhairi
LAP Lambert Academic Publishing (October 20, 2014)

Oct 2014

IP Camera Robosurveyor with Image Processing Functionality

Mohd Nazri Bin Ismail, Mohd Afizi Shukran, Megat Farez Zuhairi
LAP Lambert Academic Publishing (October 20, 2014)

Oct 2014

Fundamental of Numerical Methods for Scientists and Engineers: Basic with Application

Zulzamri Salleh
LAP Publishing

4 Nov 2011

Buku Profile FRGS THERMOMECHANICAL PROPERTIES OF ¿KOMENG¿ COCONUT ENRICHMENT WITH ACTIVATED CARBON FILLER POLYPROPYLENE COMPOSITES

Zulzamri Salleh, M.Y.M.Yusop, Ahmad Azmeer Roslee
KPT

May 2013

Critical Success Factors in Deepwater Oil and Gas Project Portfolios: An evaluation of critical success factors, strategies, concepts and methods.

Damiebi Denni-Fiberesima, Nazatul Shima Abdul Rani
VDM Verlag

May 2011

Automated Intelligent System for Recognizing Objects on Scene

Dr. Abadal-Salam T. Hussain, Syed Faiz Ahmed
LAP LAMBERT Academic Publishing, Germany

Mar 2013

Industrial Auto-Tuning Instrument for PID Controller

Syed Faiz Ahmed, Dr. Abadal-Salam T. Hussain
Scholar's Press, Germany.

Feb 2013

Automated System for Recognizing Objects on Scene

Syed Faiz Ahmed
LAP LAMBERT Academic Publishing, Germany

Feb 2013

Improve Performance of Academic HR MIS by an Efficient Selection of TQM Measurement

Dr. Abadal-Salam T. Hussain, Syed Faiz Ahmed
Scholar's Press, Germany.

Feb 2013

Electronic Speaking Glove for Speechless Patients: A Tongue to a Dumb

Saqib Munawwar, Syed Muhammad Baber Ali, Syed Faiz Ahmed
LAP LAMBERT Academic Publishing

4 Aug 2013

Review of internet gateway discovery approaches in MANET

Mukaz ebedon, M., Saad, A., Osman, H.
Advances in Intelligent Systems and Computing

2019

A study on the effect of parameters on the tensile strength of friction stir welded AA6061 1.5 mm thin plate butt-joints

Sukara, N., Ismail, A., Abdul Hamid, D., Ab Rahman, F., Ariff Baharudin, B., Megat Khalid, P.Z.
Advanced Structured Materials

2018

The mapping of full weld cycle heat profile for friction stir welding pipe butt joints

Ismail, A., Awang, M., Rahman, F.A., Baharudin, B.A., Khalid, P.Z.M., Hamid, D.A., Ahmad, K.
Advanced Structured Materials

2018

Study of MSI300 propeller characteristics using computational fluid dynamics analysis

Mohamad Sidik, M.S., Bolhassan, R., Zahelem, M.N., Abu-Bakar, M.-H.
Advanced Structured Materials

2018

Evaluation of the hardness distribution and fracture location in friction stir welded AA6063 pipe butt joints

Ismail, A., Awang, M., Rahman, F.A., Baharudin, B.A., Khalid, P.Z.M., Hamid, D.A.
Advanced Structured Materials

2018

Automatic tug assistance

Ahmed, Y.A.
Advanced Structured Materials

2018

Asas Pertahanan Awam


Oxford Fajar Sdn. Bhd.

2018

Checkpoints and requirements based cloud service ranking

Belgaum, M.R., Musa, S., Alam, M., Mohd Su¿ud, M., Soomro, S., Alansari, Z.
Lecture Notes of the Institute for Computer Sciences, Social-Informatics and Telecommunications Engineering, LNICST

2018

Mathematical model of the manoeuvring motion of a ship

Ahmed, Y.A.
Advanced Structured Materials

2018

3D reconstruction from specialized wide field of view camera system using unified spherical model

Jamaluddin, A.Z., Jiang, C., Morel, O., Seulin, R., Fofi, D.
Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics)

1 2017

Life Insurance Companies Accounting and Financial Reporting


The Malaysian Insurance Institute

2017

The development and achievement of polymeric nanoparticles for cancer drug treatment

Lee, W.-H., Loo, C.-Y., Young, P.M., Traini, D., Rohanizadeh, R.
Particulate Technology for Delivery of Therapeutics

2017

Bondability and strength evaluation of gold ball bond using nanoindentation approach

Zulkifli, M.N., Jalar, A., Abdullah, S., Othman, N.K.
Key Engineering Materials

2016

Decoration of plasma-reduced graphene oxide with uniform gold nanoparticles and their redox reaction performance

Wahid, K.A., Haniff, M.A.S.M., Ismahadi, M., Azid, I.A.
Key Engineering Materials

2016

Development of flexible haptic robot arm using flexible pneumatic cylinders with backdrivability for bilateral control

Morimoto, T., Aliff, M., Akagi, T., Dohta, S.
Lecture Notes in Electrical Engineering

6 2016

Surface roughness and wettability of SAC/CNT lead free solder

Ismail, N., Ismail, R., Nik Ubaidillah, N.K.A., Jalar, A., Zain, N.M.
Materials Science Forum

2016

Effect of aluminum source on the structural and thermal properties of Partially phosphorylated polyvinyl alcohol composite (PPVA) - Aluminum phosphate (PPVA-ALPO4) nanocomposite

Saat, A.M., Johan, M.R.
Key Engineering Materials

2016

Introduction to Entrepreneurship

Salwah Che Mat

2016

Financial Accounting 1


Oxford University Press

2016

Correlation analysis of reader¿s demographics and tweet credibility perception

Shariff, S.M., Sanderson, M., Zhang, X.
Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics)

3 2016

Managing Data in SPSS Made Easy For Medical Researchers: A Step by Step Handbook with Screenshots

Dr Sandheep Sugathan
Createspace Publishing

2015

MCQs IN OTOLOGY FOR UNDERGRADUATE MEDICAL STUDENTS

AUNG KYAW SOE

2015

Implementing low level features for human aggressive movement detection

Zizi, T.K.T., Ramli, S., Ibrahim, N., Zainudin, N.M., Abdullah, L.N., Hasbullah, N.A.
Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics)

2015

Experiment analysis and baseline hydraulic characterisation of HiPOR, a high pressure crude oil fouling rig

Tajudin, Z., Martinez-Minuesa, J.A., Diaz-Bejarano, E., Valkov, I., Orzlowski, P., Coletti, F., Macchietto, S., Hewitt, G.F.
Chemical Engineering Transactions

1 2015

Innovation Management

Hamidon Katan, Mohd Radzi Zainuddin, Azahari Jamaludin, Muhammad Pauzi Mushif

2015

Innovation Management

Salwah Che Mat

2015

The influence of process parameters on the temperature profile of friction stir welded aluminium alloy 6063-T6 pipe butt joint

Ismail, A., Awang, M., Samsudin, S.H.
Advanced Structured Materials

3 2015

Siti

Fauzi Naeim Mohamed

2015

A study on the impact of the milling parameters on the surface roughness when using polyurethane board as a base material in manufacturing automotive checking fixtures

Catherine, L.D.K., Raja Ma¿arof, R.A., Suresh, S.
Materials Science Forum

2015

A pilot study of embedding android apps with arduino for monitoring rehabilitation process

Salim, S., Wan Zakaria, W.N., Jamil, M.M.A.
Lecture Notes in Electrical Engineering

2015

Biostatistics In A Nut Shell For Medical Researchers

Dr Sandheep Sugathan
Educreation India

2015

Newly developed starch-based hydroxyethyl cellulose film with wide spectrum of ph-colour indicator

Khairuddin, N., Muhamad, I.I., Thongbua, K., Shaharuddin, S., Mohamad, S.N.H.
Key Engineering Materials

2014

Development of portable rehabilitation device using flexible spherical actuator and embedded controller

Matsui, Y., Akagi, T., Dohta, S., Aliff, M., Liu, C.
Lecture Notes in Electrical Engineering

5 2014

Simulation of automotive galvanized steel stamped parts: Experimental and numerical approach

Senin, A., Mohd Nopiah, Z., Jamaludin, M.J., Abidin, M.A., Zaudin, M.A., Ahmad, M.A., Zakaria, A.
Applied Mechanics and Materials

2014

A conceptual model of work productivity associated with work-related musculoskeletal disorders in the industrial repetitive task

Mohd Nur, N., Dawai, S.Z.M., Daharic, M.
Advanced Materials Research

2014

Issues in total productive maintenance (TPM) implementation: Justification of employing case study methodology

Hj.Bakri, A., Abdul Rahim, A.R., Yusof, N.M., Mohd. Razali, W.K., Mohd. Tohid, M.Z.-W., Ismail, S.A.
Applied Mechanics and Materials

2014

User perception of information credibility of news on twitter

Mohd Shariff, S., Zhang, X., Sanderson, M.
Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics)

8 2014

Experimental study on the determinants of surface finish in automated polishing of moulds

Suresh, S., Moe, A.L., Ahmad, N.B., Sulaiman, S.B.
Applied Mechanics and Materials

1 2014

Fatigue damage assessment correlating with I-kaz coefficient

Padzi, M.M., Abdullah, S., Nuawi, M.Z.
Applied Mechanics and Materials

2014

Optimization of spot-welds on patchwork blank for hot forming process

Ahmad, M.A., Zakaria, A.
Applied Mechanics and Materials

2014

Wear characterization of aluminum lubricated with palm olein at different normal load

Syahrullail, S., Azmi, A.M., Sapawe, N., Khalid, A.
Applied Mechanics and Materials

2 2014

Effect of low current for machining pit using electrical discharge machine

Syahrullail, S., Razak, D.M., Sapawe, N., Azli, Y., Kartiko, N.
Applied Mechanics and Materials

1 2014

Prediction of flux cored arc welding (FCAW) parameters and bead geometry in downhill position (3F)

Abd Rahman, N.M.B., Tham, A.G., Abas, S.K., Hassan, R., Manurung, Y.H.P., Redza, M.R.M., Yaakub, M.Y.
Applied Mechanics and Materials

2014

Correlation between welding parameter and bead geometry of flux cored arc welding (FCAW) in horizontal position (2F)

Abd Rahman, N.M.B., Tham, A.G., Abas, S.K., Hassan, R., Manurung, Y.H.P., Redza, M.R.M., Yaakub, M.Y.
Applied Mechanics and Materials

2014

Springback-free sheet metal structural part design by topography optimization

Adzman, M.S., Zakaria, A.
Applied Mechanics and Materials

2014

Optimization of axial rake angle for face milling using Taguchi method and finite element analysis

Ibrahim, M.R., Abd Kadir, A.R., Omar, M.S., Osman, M.H., Sulaiman, S., Razak, M.A., Abdullah, A.B.
Applied Mechanics and Materials

2014

Simulation of thermo-mechanical models for hot formed parts by numerical experiments

Senin, A., Nopiah, Z.M., Jamaludin, M.J., Zakaria, A.
Applied Mechanics and Materials

2014

Application of epoxidized natural rubber (NR) in pressure sensitive adhesives (PSAs)

Hashim, A.S., Ong, S.K.
Chemistry, Manufacture and Applications of Natural Rubber

1 2014

An investigation of the effect of 2T oil blend on spark ignition engine performance

Zahelem, M.N., Rohana, A.S., Jemily, N.H.B., Aris, M.A., Zain, S., Soid, S.N.
Applied Mechanics and Materials

2014

Recycling of aluminium-developing design criteria for aluminium cans compressor

Kowang, T.O., Long, C.S., Rasli, A.B.M., Bin Mohd Daril, M.A., Mustapha, I.
Advanced Materials Research

2014

Surface quality of high speed milling of silicon carbide by using diamond coated tool

Iqbal, M., Konneh, M., Md Said, A.Y.B., Bin Mohd Zaini, A.F.
Applied Mechanics and Materials

2014

Effect of tool path strategies in pocket milling of aluminium epoxy

Song, R.M., Sharif, S., Md Said, A.Y., Mohd Khushairi, M.T.
Advanced Materials Research

2014

Monitoring initial glucose concentration for optimum ph control during fermentation of microbial cellulose in rotary discs reactor

Zahan, K.A., Pa'E, N., Seng, K.F., Muhamad, I.I.
Key Engineering Materials

1 2014

Potential use of biofibers for functional immobilization of lactobacillus rhamnosus NRRL 442

Shaharuddin, S., Muhamad, I.I., Seng, K.F., Zahan, K.A., Khairuddin, N.
Key Engineering Materials

2 2014

Sugarcane bagasse as the potential agro-waste resource for the immobilization of lactobacillus rhamnosus NRRL 442

Shaharuddin, S., Abd Razak, S.I., Muhamad, I.I.
Advanced Materials Research

2014

Six sigma applications: Enhancement sigma level towards quality improvement at automative company

Mohamad Ikbar, A.W., Allina, A., Rahmat, R.B., Yacob, S., Muhammad Nazif, H., Noor Sulawati, M.R., Mohd Haziq, Z., Nurulhuda, A., Mohd Amran, M.D., Ishamuddin, M.
Advanced Materials Research

2014

A review on the total productive maintenance (TPM) conceptual framework

Hj.Bakri, A., Abdul Rahim, A.R., Noordin, Y.M., Mohd. Razali, W.K., Mohd. Zul-Waqar, M.T., Shaiful Anwar, I.
Applied Mechanics and Materials

2014

Preliminary study of fuel injector monitoring system by I-kazâ¿¢ multilevel analysis

Karim, Z., Jusoh, M.A., Bahari, A.R., Nuawi, M.Z., Ghani, J.A., Abdullah, S.
Applied Mechanics and Materials

2014

Finite element simulation of ductile failure process of spot welded joint under tensile loading

Kosnana, M.S.E., Ahmad, Z., Borhanac, A.A., Tamin, M.N.
Applied Mechanics and Materials

2014

Granularity of personal intelligence in social networks

Ismail, S., Ahmad, M.S., Hassan, Z.
Studies in Computational Intelligence

2014

Characterization on optical and mechanical properties of Low-Density Polyethylene films doped with Eu(III)complex

Nordin, M.N., Nik Abd Aziz, N.M.A., Hashim, H., Abdullah, A.M., Shualdi, W., Ezwan, M.I., Mohd Isha, K., Ismail, F.
Advanced Materials Research

2014

Synthesis and characterization of magnetic mesoporous γ-FE2O3/SIO2

Shaari, N.S., Ibrahim, S., Jamil, F.M., Zubir, Z.A., Abdullah, A.M., Muhammad, N.A., Wan Jaafar, W.M.N., Malik, M.Z.A.
Advanced Materials Research

2014

The influence of normal load in wear resistance characteristic of palm fatty acid distillate

Syahrullail, S., Norhakem, H.M., Sapawe, N., Khalid, A.
Applied Mechanics and Materials

2014

Study on fabrication of ceramic membrane from shirasu balloon for waste water filtration

Ahmad, N., Yuzo, N., Kamibayasi, H., Mohamed Bazin, M.
Advanced Materials Research

2013

Social media as online information grounds: A preliminary conceptual framework

Narayan, B., Talip, B.A., Watson, J., Edwards, S.
Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics)

5 2013

Potential of upgrading domestic biomass into a higher energy density via torrefaction process

Iqbal, A.M., Zainal, Z.A., Mustafa Al Bakri, A.M., Mazlan, M., Soid, S.N., Nasir, K.M.
Advanced Materials Research

2013

Effects of pulse duration and current on EDM process of Allegheny Ludlum D2 toolsteel

Sulaiman, S., Khan, A.A., Razak, M.A., Ibrahim, M.R., Yusof, M.S.
Applied Mechanics and Materials

2013

Fabrication and characterization of ceramic membrane by gel cast technique for water filtration

Ahmad, N., Mohd Zaidan, N.B., Mohd Bazin, M.
Advanced Materials Research

2013

Experimental of wood gasification in suction biomass gasifier

Ahmad, M.I., Alauddin, Z.A.Z., Soid, S.N.M., Mohamed, M., Yusoff, M.H.
Advanced Materials Research

1 2013

Modular tooling concept in the fabrication of the precision AUV blade

Abdullah, A.B., Samad, Z., Khaleed, H.M.T., Husaini, M.
Applied Mechanics and Materials

2013

Technopreneurship

Azahari Jamaludin, Abd Razak Mohd Yusoff, Hamidon Katan, Zawiah Abdul Majid

2013

Prediction of welding parameters and weld bead geometry for GMAW process in overhead T-fillet welding position(4F)

Yaakub, M.Y., Tham, G., Abd Rahim, W.M.A.W., Mohd Radzi, M.A.R., Mahmud, A.
Advanced Materials Research

2013

Use of hydro generator on a tanker ship: A computer-generated simulation study

Yutuc, W.
Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics)

2013

Regulating protein adsorption onto hydroxyapatite: Amino acid treatment

Lee, W.H., Loo, C.Y., Van, K.L., Zavgorodniy, A.V., Rohanizadeh, R.
Key Engineering Materials

2012

Predicting the GMAW 3F T-Fillet Geometry and Its Welding Parameter

Mohamad Yazman YAAKUB
Procedia Engineering

2012

A framework for a feature based machining using macro

Razak, M.A.A., Zakaria, A.
Applied Mechanics and Materials

2012

Hardness variation of ball bond wire bonding

Zulkifli, M.N., Jalar, A., Abdullah, S., Shamsudin, R., Zulkifli, R.
Advanced Materials Research

1 2012

Fatigue life assessment of aluminium alloy 6061 specimen using signal analysis approach for automotive components

Azmir, N.A., Abdullah, S., Padzi, M.M.
Applied Mechanics and Materials

2012

Microstructure and phases of As-cast and heat-treated Al-Si-Mg/AlN composites prepared by stir casting

Daud, A.R., Wahab, M.N.
Advanced Materials Research

2012

Wear monitoring of connecting rod bearing via air-borne method analyzed by using I-kaz TM multi level value

Karim, Z., Nuawi, M.Z., Ghani, J.A., Abdullah, S., Ghazali, M.J.
Advanced Materials Research

3 2012

Technopreneurship

Salwah Che Mat

2012

Accurate prediction of springback in forming of BIW parts

Bashah, N.A.K., Zakaria, A., Kamarulzaman, K.Z., Mobin, A., Lazat, M.S.M.A., Muhamad, N., Md Deros, B.
Applied Mechanics and Materials

2012

Mixed-flow impeller characteristics in baffled mixing tank

Adeyemi, N., Mohiuddin, A.K.M., Husaini, M., Jameel, A.T.
Advanced Materials Research

2012

A nodal approach to agent-mediation in personal intelligence

Ismail, S., Ahmad, M.S.
Communications in Computer and Information Science

2012

Searching for Islamic and Qur'anic information on the web: A mixed-methods approach

Wan-Chik, R., Clough, P., Ford, N.
Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics)

3 2011

Inter-cell interference mitigation and coordination in CoMP systems

Katiran, N., Fisal, N., Syed Yusof, S.K., Mohamad Maharum, S.M., Ab Ghafar, A.S., Asraf Saparudin, F.
Communications in Computer and Information Science

7 2011

Communications in computer and information science: Techniques on relaying for LTE-advanced network

Ab Ghafar, A.S., Satiman, N., Fisal, N., Mohamad Maharum, S.M., Saparudin, F.A., Abdul Rashid, R., Syed Yusof, S.K., Katiran, N.
Communications in Computer and Information Science

2 2011

Critical Success Factors in Deepwater Oil and Gas Project Portfolios: An Evaluation of Critical Success Factors, Strategies, Concepts and Methods


2011

Modeling interpolated distance error for clutter based location estimation of wireless nodes

Alam, M., Mohd Su'Ud, M., Boursier, P., Musa, S.
Communications in Computer and Information Science

1 2011

Evidential notions of defensibility and admissibility with property preservation

Phan, R.C.-W., Amran, A.R., Whitley, J.N., Parish, D.J.
Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics)

1 2011

Location estimation and filtering of wireless nodes in an open environment

Muhammad, A., Mazliham, M.S., Boursier, P., Shahrulniza, M.
Communications in Computer and Information Science

2011

Location Estimation and Filtering of Wireless Nodes in an Open Environment

Shahrulniza Musa

2011

A statistical based analysis approach on fatigue failure assessment of carbon steel

Md Padzi, M., Abdullah, S., Nuawi, M.Z.
Applied Mechanics and Materials

6 2011

Experimental analysis of an instrumented charpy impact using signal processing approach

Ali, M.B., Abdullah, S., Nuawi, M.Z., Padzi, M.M., Zakaria, K.A.
Advanced Materials Research

2011

Fatigue damage assessment of the engine mount bracket using a statistical based approach

Zakaria, K.A., Abdullah, S., Ghazali, M.J., Nuawi, M.Z., Md Padzi, M.
Advanced Materials Research

8 2011

Nanoindentation test for the stiffness distribution analysis of bonded Au ball bonds

Othman, N.K., Zulkifli, M.N., Jalar, A., Abdullah, S.
Advanced Materials Research

2011

Nanoindentation approach for evaluation of process parameters effect on the strength of bonded au ball bonds

Abdullah, S., Zulkifli, M.N., Jalar, A.
Advanced Materials Research

2011

Nanoindentation test for the strength distribution analysis of bonded Au ball bonds

Jalar, A., Zulkifli, M.N., Abdullah, S.
Advanced Materials Research

9 2011

Effect of different filler metals towards welding of AA6061 Al Alloy by X-ray CT scan

Nur Azida, C.L., Jalar, A., Othman, N.K., Rashdi, N.M., Ibel, Md.Z.
Advanced Materials Research

2011

Effects of different fillers on microstructure and tensile properties of welded AA6061-T6

Aziz, A.A.A., Ibrahim, M.F.A., Jalar, A., Junaidi, S., Abdullah, S., Rashdi, N., Kornain, Z.
Key Engineering Materials

3 2011

Effect of porosity on tensile behaviour of WELDED AA6061-T6 aluminium alloy

Ahmad Ibrahim, M.F., Bakar, S.R.S., Jalar, A., Othman, N.K., Sharif, J., Daud, A.R., Rashdi, N.M.
Applied Mechanics and Materials

2011

The effect of filler ER4043 and ER5356 on porosity distribution of welded AA6061 aluminium alloy

Che Lah, N.A., Ahmad Ibrahim, M.F., Jalar, A., Sharif, J., Othman, N.K., Rashdi, N.M.
Advanced Materials Research

3 2011

A Comparative Analysis between Conventional and Islamic Banking System: an Overview of Deposit Insurance Scheme: Issue on Contemporary

Issoufou Chaibou PhD
LAP LAMBERT Academic Publishing GmbH & Co.KG

2011

Polyhydroxyalkanoate

Bhubalan, K., Lee, W.-H., Sudesh, K.
Biodegradable Polymers in Clinical Use and Clinical Development

3 2011

Effect of aging treatment on microstructure and mechanical properties of Al-Si matrix alloy reinforced with high purity aluminum nitride (AlN)

Wahab, M.N., Ghazali, M.J., Daud, A.R.
Key Engineering Materials

2011

Effect of Aluminum Nitride (AlN) addition on wear and mechanical properties of Al-Si alloy composites fabricated by stir casting process

Wahab, M.N., Ghazali, M.J., Daud, A.R.
Key Engineering Materials

2011

Effect of aluminum nitride addition on dry wear properties of Al-11%Si alloy prepared by stir casting process

Wahab, M.N., Ghazali, M.J., Daud, A.R.
Advanced Materials Research

2011

Beyond kernel-level integrity measurement: Enabling remote attestation for the android platform

Nauman, M., Khan, S., Zhang, X., Seifert, J.-P.
Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics)

35 2010

Tool wear of PVD coated carbide tool when finish turning inconel 718 under high speed machining

Yazid, M.Z.A., Che Hassan, C.H., Jaharah, A.G., Gusri, A.I., Ahmad Yasir, M.S.
Advanced Materials Research

4 2010

Fatigue detector using eyelid blinking and mouth yawning

Mohd Noor, H.A., Ibrahim, R.
Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics)

1 2010

Cutting force analysis when milling Ti-6Al-4V under dry and near dry conditions using coated tungsten carbides

Ahmad Yasir, M.S., Che Hassan, C.H., Jaharah, A.G., Norhamidi, M., Gusri, A.I., M Zaid, A.Y.
Advanced Materials Research

4 2010

Predicted and corrected location estimation of mobile nodes based on the combination of Kalman Filter and the Bayesian decision theory

Alam, M., Suud, M.M., Boursier, P., Musa, S., Yusuf, J.C.M.
Lecture Notes of the Institute for Computer Sciences, Social-Informatics and Telecommunications Engineering

6 2010

Automatic left ventricle segmentation in T2 weighted CMR images

Kadir, K.A., Payne, A., Soraghan, J.J., Berry, C.
Advances in Intelligent and Soft Computing

3 2010

Effect of aged AlN reinforced Al-Si alloys on dry sliding wear behaviour

Ghazali, M.J., Wahab, M.N., Daud, A.R., Ghani, J.A.
Advanced Materials Research

2010

Group Decision Making Model: Facing a Facility Layout Selection Problems in Manufacturing Organization

Roslin, E. N., Dawal, S. Z. M., Ahmed, S., Ieee,
2009 International Conference for Technical Postgraduates

2009

Posterior Probabilities based Location Estimation (P2LE) Algorithm for Locating a Mobile Node in a Disaster Area M

Mazliham Mohd Su'ud

2009

Optical and structural properties of multi deposition film derived SiO 2-TiO2 systems by sol-gel process

Malek, M.Z.A., Zainuddin, M.T., Abdullah, A.M., Isnin, A.
Advanced Materials Research

2008

Interpretation of sound tomography image for the recognition of Ganoderma infection level in oil palm

Mazliham, M.S., Loonis, P., Idris, A.S.
Lecture Notes in Electrical Engineering

1 2008

Using time series 3D AlertGraph and false alert classification to analyse Snort alerts

Musa, S., Parish, D.J.
Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics)

7 2008

Evolutionary feature selections for face detection system

Mohd Zin, Z., Khalid, M., Yusof, R.
Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics)

2008

Selective extraction and separation of Cu (II), Zn (II), Ni (II) and Fe (III) from the leach liquor of Printed Circuit Board using Cyanex 272 coated microcapsules

Md. Sohrab Hossain

2008

Effect of Na-alginate and bead diameter on lactic acid production from pineapple waste using immobilized Lactobacillus delbrueckii ATCC 9646

Idris, A., Wahidin, S.
Studies in Surface Science and Catalysis

2 2006

Polyhydroxyalkanoate (PHA) production from waste

Rhu, D.H., Lee, W.H., Kim, J.Y., Choi, E.
Water Science and Technology

2003

Teknologi dalam Pembelajaran Matematik Peringkat Tinggi.

Tuan SALWANI Salleh, Effandi Zakaria

Design and Fabrication of ROV (Remotely Operated Underwater Vehicle) for Underwater Exploration~ autofilled~

Ghani, Muhamad Fadli

Back