Profile

MUHAMAD HUSAINI BIN ABU BAKAR, DR.

SENIOR LECTURER
MANUFACTURING SECTION
UNIVERSITI KUALA LUMPUR KAMPUS CAWANGAN MALAYSIAN SPANISH INSTITUTE

muhamadhusaini@unikl.edu.my

55 publications
Researcher Identities
ORCID ID : 
ResearcherID : 
Publication(s)
  Title Cited By Year

Analysis of temperature distribution behavior of motorcycle brake pads

bin Shaffee, K.S., Musa, M.K.H.A., Mohamad Sidik, M.S., Majid, M.F.M.A., Abu Bakar, M.H.
Advanced Structured Materials

2019

Automotive Metallic Component Inspection System Using Square Pulse Thermography

Maskuri, N.L., Beli, E.S., Ismail, A.K., Abu Bakar, M.H.
Advanced Structured Materials

2019

Corrosion Analysis of Aluminum-Air Battery Electrode Using Smoothed Particle Hydrodynamics

Osman, F., Mohd Nazri, A.H., Mohamad Sidik, M.S., Abu Bakar, M.H.
Advanced Structured Materials

2019

Deep Contractive Autoencoder-Based Anomaly Detection for In-Vehicle Controller Area Network (CAN)

Lokman, S.F., Othman, A.T., Musa, S., Abu Bakar, M.H.
Advanced Structured Materials

2019

Deep Neural Network Modeling for Metallic Component Defects Using the Finite Element Model

Isamail, L., Maskuri, N.L., Isip, N.J., Lokman, S.F., Abu Bakar, M.H.
Advanced Structured Materials

2019

Design and Analysis of an Aluminium Ion Battery for Electric Vehicles

Zamri, F.A., Faris Jumari, M.Z., Abu Bakar, M.H., Zahelem, M.N.
Advanced Structured Materials

2019

Design and Temperature Analysis of an Aluminum-Air Battery Casing for Electric Vehicles

Mohamad Zaini, M.N., Mohd-Kamal, M.-S., Mohamad Sidik, M.S., Abu Bakar, M.H.
Advanced Structured Materials

2019

Design and fabrication of a magneto-rheological fluid based torque sensor for automotive application

Abu Bakar, M.H., Alwi, A.Q.
Advanced Structured Materials

2019

Development of a 2-dof parallel kinematics machine for macro scale products

Maskuri, N.L., Abu Bakar, M.H., Ab Kadir, A.R.
Advanced Structured Materials

2019

Development of a capacitor using a rubber based magneto rheological elastomer

Abu Bakar, M.H., Hadzir, M.N.H., Muhamad, M.T.
Advanced Structured Materials

2019

Development of an Aluminum-Air Battery Using T6-6061 Anode as Electric Vehicle Power Source

Osman, F., Harith, M.Z., Mohamad Sidik, M.S., Abu Bakar, M.H.
Advanced Structured Materials

2019

Effect of the magnetic field on magnetic particles in magnetorheological elastomer layers

Hadzir, M.N.H., Abu Bakar, M.H., Azid, I.A.
Advanced Structured Materials

2019

Intrusion detection system for automotive Controller Area Network (CAN) bus system: a review

Lokman, S.-F., Othman, A.T., Abu-Bakar, M.-H.
Eurasip Journal on Wireless Communications and Networking

2019

Kinetic modelling of a particle grinding process in a planetary ball mill jar

Abu Bakar, M.H., Ahmad-Fauzi, A.-F., Maskuri, N.L.
Advanced Structured Materials

2019

Large eddy simulation of vehicle aerodynamics using parallel computational fluids dynamics

Abd-Halim, A.-M., Abu Bakar, M.H.
Advanced Structured Materials

2019

Numerical investigation of magneto-hydrodynamics in a magnetic peristaltic pump

Osman, F., Abu Bakar, M.H.
Advanced Structured Materials

2019

Parametric study of the two-stage pyrolysis process for activated carbon preparation from pithecellobium jiringa

Abu Bakar, M.H., Mohd-Kamal, M.-S., Che-Adnan, M.-N.
Advanced Structured Materials

2019

Preface

Ismail, A., Abu Bakar, M.H., Öchsner, A.
Advanced Structured Materials

2019

Simulation of Crude Palm Oil Dilution in a Palm Oil Mill Using Computational Fluid Dynamics

Mohammad Fauzi, A.H., Saifuddin, M.N.A.A., Kasim, F.H., Abu Bakar, M.H., Zakaria, Z.Y., Abu Bakar, M.Z.
Chemical Engineering and Technology

2019

Study the Effect of Acetone as an Inhibitor for the Performance of Aluminium-Air Batteries

Mohd-Kamal, M.-S., Abu Bakar, M.H., Yaacob, S.
Advanced Structured Materials

2019

Synthesis and Thermal Characterization of Graphite Polymer Composites for Aluminium Ion Batteries

Zamri, F.A., Isa, N., Abu Bakar, M.H., Zahelem, M.N.
Advanced Structured Materials

2019

Synthesis of polypropylene solid state electrolytes for batteries using a polymerization heat chamber

Abu Bakar, M.H., Hana, K.F.
Advanced Structured Materials

2019

The Potential of Improving the Mg-Alloy Surface Quality Using Powder Mixed EDM

Razak, M.A., Abdul-Rani, A.M., Aliyu, A.A., Abu Bakar, M.H., Ibrahim, M.R., Shukor, J.A., Abdullah, A., Rezal, M., Haniff, M.F., Saad, F.
Advanced Structured Materials

2019

Three dimensional simulation of filling process for stacked-chip scale packages

Mior Abd Majid, M.F., Mohamad Sidik, M.S., Abu Bakar, M.H., Shafee, K.S., Yusuf, Z.N.M., Zain, M.S.M., Zulkifly Abdullah, M.
Advanced Structured Materials

2019

Deep Neural Network Tool Chatter Model for Aluminum Surface Milling Using Acoustic Emmision Sensor

Abul Hasan, M., Abu-Bakar, M.-H., Razuwan, R., Nazri, Z.
MATEC Web of Conferences

2018

Investigation of Damping Coefficient for Magnetorheological Elastomer

Hadzir, M.N.H., Norfaidayu, Z.A., Sabri, M.S.M., Abu-Bakar, M.-H.
MATEC Web of Conferences

2018

Optimised structure of convolutional neural networks for controller area network classification

Lokman, S.-F., Bin Othman, A.T., Abu-Bakar, M.-H.
ICNC-FSKD 2018 - 14th International Conference on Natural Computation, Fuzzy Systems and Knowledge Discovery

2018

Study of MSI300 propeller characteristics using computational fluid dynamics analysis

Mohamad Sidik, M.S., Bolhassan, R., Zahelem, M.N., Abu-Bakar, M.-H.
Advanced Structured Materials

2018

Design and development of coil casing MRF brake system

Muhamad-Husaini
MATEC Web of Conferences

2017

Particle Dispersion Model for Predicting the Percolation Threshold of Nano-Silver Composite

Muhamad-Husaini

2017

Study of underwater thruster (UT) front cover of msi300 Autonomous Underwater Vehicle (AUV) using finite element analysis (FEA)

Sabri, M., Ahmad, T., Majid, M.F.M.A., Muhamad Husaini, A.B.
ARPN Journal of Engineering and Applied Sciences

2017

Vision-Based Positioning System for Magnetorheological Fluid Actuator Using NNARX

Muhamad-Husaini
Advanced Science Letters

2017

Design and fabrication of interference Press-Fit Nut

Aznizam, A., Husaini, M., Mohd Yusof, Z.N., Ibrahim, M.R., Maidin, S.
ARPN Journal of Engineering and Applied Sciences

2016

Inprenut application in design for assembly: Case study on wheel mobile robot platform construction

Aznizam, A., Ibrahim, M.R., Razak, M.A., Husaini, A.B., Maidin, S.
ARPN Journal of Engineering and Applied Sciences

2016

Particle Dispersion Model for Predicting the Percolation Threshold of Nano-Silver Composite

Muhamad-Husaini
Arabian Journal for Science and Engineering

2016

Predicting the RVE size of micro-particle composite for electrical purpose using particles dispersion developed

Zulkarnain, M., Hilmi, R.A.A.M., Husaini, A.B.M., Mariatti, M., Azid, I.A.
Microsystem Technologies

2016

Numerical investigation for cooperative multi blimp system

Kadir, H.A., Abdul Wahab, M.H., Arshad, M.R., Husaini, A.B.
ARPN Journal of Engineering and Applied Sciences

2015

Particle Arrangement Design for Predicting the Percolation Threshold of Silver/Epoxy Composite for Electrically Conductive Adhesive Application

Zulkarnain, M., Husaini, M., Mariatti, M., Azid, I.A.
Journal of Electronic Materials

2015

Development of Machine Vision Positioning System of Magnetorheological Fluid (MRF) Actuator

Muhamad-Husaini
Applied Mechanics and Materials

2014

Conceptual design and preliminary analysis on bio-inspired squid micro AUV

Muhamad-Husaini
Mechatronics and Automation (ICMA), 2013 IEEE International Conference on

2013

Model identification and control analysis for underwater thruster system

Muhamad-Husaini

2013

Modular tooling concept in the fabrication of the precision AUV blade

Abdullah, A.B., Samad, Z., Khaleed, H.M.T., Husaini, M.
Applied Mechanics and Materials

2013

Nonlinear modeling and identification of underwater thruster

Husaini, A.B., Anam, K., Samad, Z., Arshad, M.R.
Advanced Materials Research

2013

Preliminary analysis on generated jet pressure from ionic polymer composite actuated radial contraction using balloon manometry technique

Muhamad-Husaini
Indian Journal of Geo-Marine Science

2013

Preliminary analysis on generated jet pressure from ionic polymer composite actuated radial contraction using balloon manometry technique

Muhamad-Husaini

2013

A novel manufacturing method of propeller for autonomous underwater vehicle (auv) using cold forging process

Muhamad-Husaini
IJMS

2012

Mixed-flow impeller characteristics in baffled mixing tank

Adeyemi, N., Mohiuddin, A.K.M., Husaini, M., Jameel, A.T.
Advanced Materials Research

2012

Modeling and Contro ol Analysis of URRG Monohull Blimp

Muhamad-Husaini
Procedia Engineering

2012

Optimum tip gap and orientation of multi-piezofan for heat transfer enhancement of finned heat sink in microelectronic cooling

Muhamad-Husaini
International Journal of Heat and Mass Transfer

2012

Twist Springback Measurement of AUV Propeller Blade Based on Profile Deviation

Muhamad-Husaini
Advanced Materials Research

2012

Autonomous underwater vehicle propeller simulation using computational fluid dynamic

Muhamad-Husaini
Computational Fluid Dynamics Technologies and Applications

2011

Investigation of electromagnetic force during short-circuit test in three-phase busbar system

Muhamad-Husaini
Humanities, Science and Engineering (CHUSER), 2011 IEEE Colloquium on

2011

Optimization of underwater composite enclosure design using response surface methodology

Muhamad-Husaini

2011

Finite element analysis and experimental validation of flashless cold forging of propeller hubs and blade of autonomous underwater vehicle

Muhamad-Husaini
Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture

2010

CFD simulation of cooperative AUV motion

Muhamad-Husaini

2009
UniKL Researcher - MUHAMAD HUSAINI ABU BAKAR